No contact cleaners use high frequency sound waves to clean delicate products by generating millions of tiny, imploding bubbles. This nonabrasive technique is perfect for hard to reach surfaces. Let’s look at a few troubleshooting suggestions.

Your Cleaner Won’t Turn On

If your large ultrasonic cleaner is plugged in and your outlet has power, you might have a blown mains fuse.

Your Cleaner Isn’t Cativating

If your unit isn’t cleaning, submerge a sheet of foil in your tank for two minutes. If it’s working correctly, your foil will have hundreds of tiny holes. If not, move to the next step.

Check Your Generator and Water Level

Make sure your unit is filled to the top and check whether your transducers are receiving power. Your generator might not be working, so you’ll need the support of a manufacturer such as //www.hilsonic.co.uk/.

Your Unit Isn’t Cleaning Evenly

If you notice uneven results, you might have overloaded the tank. Check whether your unit’s components are touching one another or the tank’s base.

Your Heating Elements Aren’t Working

You can bypass your heating element by using hot tap water or an external immersion heater. Alternatively, look for cracks or damaged wiring in your element.

Your ultrasonic cleaner will last longer if you change your solution every day and clean the tank frequently. Your unit should never be run dry, so it’s crucial to keep an eye on your operating levels. With regular maintenance and filter checks, your cleaner shouldn’t present any problems.