The importance of scaffolding design

Discovering the best solution for scaffolding is a vital element in the majority of construction projects and normally that scaffolding needs to be designed. This needs to be carried out by specialists who understand the unique requirements of each location. So, what are the key things to think about when getting a scaffold design?

Accuracy is paramount

Scaffolding design from the leading companies takes advantage of the latest technology – from CAD software to wind load analysis and framing analysis. Using the latest software packages allows designers to create far more accurate designs but remains limited by the quality and accuracy of the information provided to the designer. The more accurate the information, the more accurate the scaffolding designs will be. For Scaffolding Essex, visit a site like

Adequate preparation

The design of scaffolding is crucial to ensure that every job has a structure that is tailored to the exact nature of the work site and the work itself, as well as safety measures for avoiding legal or compliance issues. Before the scaffold designers began working on the design, they should be made aware of any barriers, doors or access routes that must be kept clear.

image credit

There may also be another problem regarding the location of the scaffolding they need to be aware of underground issues, or nearby railway lines or road foundations. The designer should have a good understanding of any such things in the area where the scaffolding is required; probably a good idea to consider a set designer for visiting the site so they can more easily visualize the surroundings and where the scaffolding will be. There will normally be a fee for this service, but it can save time and costs in design in revisions.

Image credit

Guidelines for guardrails

Crucial for safety, guardrails help prevent falls during on going construction projects. Normally, edge protection will include a top rail, a lower rail and foot board with the upper rail at just over 1m high and the gap between the rails no more than 470mm. If the edge protection is located on pitched roofs with handrails running perpendicular to the slope of the roof, then consideration should be given to the angle of the roof. There are three different classes of edge protection for pitched roofs for a variety of field angles – each has a different set of requirements. If handrails running in the same direction of the slope is along the gable end, then it could be classified as a flat roof. Thought should also be given to how and where the edge protection will remain with permanent structures.

Scroll To Top